HALT & HASS Chamber Time Compressor® 1.5

This model is ideal for HALT & HASS testing of small products and offers the most cost-competitive chamber on the market today. Chamber design features a compact footprint with an 18” x 18” (46cm x 46cm) vibration table. Selectable air ducts for concentrated air flow are included along with efficient LN2 and power usage for decreased operating costs.

System Benefits

  • Superior reliability and thermal performance
  • Significantly better high and low vibration limits (required for detection)
  • Quiet operation
  • Low LN2 and utility usage for greater ROI

HALT! Try Before You Buy
Receive 15% off HALT & HASS testing services for any orders placed through December 31, 2017.

  • Specifications
  • Vibration
  • Instrumentation
  • Communications
  • Cabinet

Temperature Range -100°C to 200°C
Temperature Ramp Rate 70°C to 100°C per minute¹
Vibration Level 1 - 90 GRMS
Frequency Range 0 Hz - 10 KHz
Table Size
18" x 18"
(43cm x 43cm)
Actuators 6
Workspace Dimensions
30"W x 30"D x 30"H
(76cm x 76cm x 76cm)
Outside Dimensions
62"W x 41"D x 80"H
(157cm x 104cm x 203cm)
¹Measured at -65°C to 85°C 6” above table center with hoses attached. Rate will vary depending on model and dwell time.

  • Large dynamic range shaker with six actuators and 1 GRMS to 90 GRMS with a bare table. High GRMS levels are used to enhance precipitation while low GRMS levels, with Modulated Excitation™, help to increase detection.
  • A diaphragm is included to prevent vibration table temperature changes. It also provides better low-frequency vibration coupling than a bare table.

  • CSZ EZT-570i Touch Screen Controller with data logging, remote control & monitoring, email/text alarm notification messages, data file backup system, full system security and more. Includes pre-programmed test profiles for faster program implementation.
  • Factory preset mechanical over temperature limit. Separate user-adjustable electronic limits are also included for over and under temperature and vibration, providing fully redundant safety limits.
  • Safety relay connection is provided for customer use to protect the device being tested by turning off its power when the chamber is not running.

  • RS-232/485 serial communications and Ethernet control/monitoring offer a selection of communications options.
  • EZ-View works with EZT-570i controller to provide remote monitoring, control, data logging and store/graph measured temperature and vibration GRMS data. This software is provided as a no cost value added feature.

  • Door includes heated window to prevent frost build up along with a safety interlock switch to prevent the system from running with the door open.
  • One 4" x 8" (10cm x 20cm) side port and front 2" x 6" (5cm x 15cm) cable notch for easy cable routing.
  • Stainless steel interior and durable powder-coated exterior.